LPCB Addressable Manual Call Point for Fire Alarm System

The AW-D305 Addressable manual call point ( hereinafter referred to AW-D305 Addressable) is mainly designed to be used with an intelligent two-bus control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the coded address and the equipment status of the manual fire call points. When the manual fire call points is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit. The AW-D305 Addressable supports electronic coding, more suitable for engineering application convenient.

SKU: ECFA-AW-D305 Category:

Description

Addressable Manual Call Point features:

1. Semi-flush or surface mounting
2. Compatible with the latest EN standards
3. Lever reusable ( non-glass break )
4. LED indicator
5. Full electronic coding, through CODER-9001 encoder scene rewrite

Addressable Manual Call Point Technical Parameters:

Operating Voltage Signal Loop 24V(18V~28V)
Power 24VDC(20VDC~28VDC)
Standby Current Loop<0.8mA ; Power<2mA
Action Current Loop<5mA ; Power<15mA
Output Capacity 1A@DC30V
Input Mode Setting NC or NO input mode can be set by the jumper JP4.
Programming Method Electronically addressed
Code Range One address within 1~324.
Indicators Inspection indicator: l blink once about every 12 seconds in the inspection status or remain lit in the output status;
Input indicator : remain lit in the feedback status.
Operating Temperature -10℃~+55℃
Relative Humidity ≤95% , non-condensing
Material of Enclosure ABS
Dimension (L×W×H) 86mm×86mm×41mm
(with base)
Mounting Hole Distance 60.5mm
Weight About 148g (with base)
Operating Voltage Signal Loop 24V(18V~28V)
Power 24VDC(20VDC~28VDC)

Reviews

There are no reviews yet.

Be the first to review “LPCB Addressable Manual Call Point for Fire Alarm System”

Your email address will not be published. Required fields are marked *