ISOLATOR MODULE, ISOLATE THE LOOP CABLE

Rp617,100.00

Asenware is an intelligent addressable isolator module, which can be configured with Asenware FP100 Series Addressable Fire Alarm Control Panel. Each point (devices) can be given specific ID or individual address, which allows the panel to continuously monitor specific location (point). The module has two panel controlled LED indicator. Isolator modules is used to protect the system against wire-to-wire short circuits on the signaling line circuit.

SKU: ECP-FAS-00081 Category:

Description

• Addressable-analog communication
• Two-wire connection
• Two LEDs one is Green, which blinks in normal condition and another one is Red which becomes steady during fire alarm condition.
• Remote test from Panel
• Automatically reset after correction of fault
Model No.  AW-D114
Operating Voltage 18V-28V DC
Standby Current ≤ 25 mA
Alarm Current ≤ 80 mA
Output Current ≤900mA
Protection Level IP 30
Temperature -10℃~50℃

Installation

• AW-D114 addressable monitor module must be installed as per the final
drawings and wiring diagram.
• Set the address on the monitor module using programmer.

• Secure the module in the electrical box, supplied with the monitor module.

Wiring Connection

Reviews

There are no reviews yet.

Be the first to review “ISOLATOR MODULE, ISOLATE THE LOOP CABLE”

Your email address will not be published. Required fields are marked *